Orec Rabbit RM982F 4WD V-Twin Ride-On Brushcutter with Hydrostatic Drive
Combining a 4WD transmission with a low centre of gravity, a wide-profile design and a differential lock, this high-end commercial-use ride-on brushcutter from Orec will take the most challenging terrain in its stride!
Positioned behind the driver’s seat is a hugely powerful, 23hp, Briggs & Stratton Vanguard engine; a V-Twin, OHV-type unit with an industrial pleated-paper-type air filter and a Dura-Bore cast-iron cylinder sleeve, which bring peace of mind when it comes to long-term reliability.
A key starter and a Magnetron® electronic ignition combine to eliminate starting problems; B & S’s low-oil shutdown technology serves to reduce the chance of engine damage due to insufficient lubrication.
The Orec Rabbit RM982F 4WD Ride-On Brushcutter comes equipped with an expansive 98cm double bladed cutting deck, which floats to ensure the blades follow every contour of the ground.
It boasts a three-stage adjustable steering wheel, so operators of any stature and build can work in comfort, and it offers infinite increment height of cut adjustment (50 to 110mm), which is controlled using a gas-spring-supported lever for convenience.
Thanks to its hand and foot-pedal operated hydrostatic drive, which delivers infinitely variable ground-speed control (forward and reverse), the Orec Rabbit RM982F is impressively manoeuvrable, and excels at obstacle negotiation.
Also noteworthy on the premium, Japanese-engineered Orec Rabbit RM982F are the high-traction tyres, which ensure you won’t be defeated by adverse weather conditions; and the high-volume, 14-litre fuel-tank, which works with the engine’s fuel saving overhead-valve design to ensure top-up breaks will prove few and far between.
If you need four-stroke engine oil, you’ll find it here.
Reviews
There are no reviews yet.